Users Guide

● Remote Access Alerts—These alerts contain information about SNMP traps from iDRAC6, iDRAC7, and iDRAC8
devices.
See Alert views displayed by different monitoring features on page 42.
3. Select the required Alert View. In the right pane, alerts that meet the criteria—such as alert severity, resolution state, or
alerts that are assigned to you—are displayed.
4. Select an alert to view the details in the Alert Details section.
Diagram views in the DRAC monitoring feature
The Dell EMC Diagram Views offer a hierarchical and graphical representation of all Dell DRAC devices on the network.
To view the diagrams for DRAC monitoring feature on the SCOM console:
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Diagram Views.
3. In the Monitoring pane, select Dell EMC Diagram Views folder for the following views:
● Dell EMC Complete Diagram View
● Remote Access Controllers Group
See Diagram views displayed by different monitoring features on page 42.
Figure 1. Remote Access Controllers Group Diagram View
4. Select a required Dell EMC Diagram View to view the hierarchical and graphical representation of the selected DRAC in the
right pane.
5. Select a component in the diagram to view its details in the Detail View section.
State views in the DRAC monitoring feature
About this task
The State View is available for viewing the health of Dell EMC DRAC devices that are monitored by different monitoring
features of Dell EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP Management Pack. To view the state of a
device:
Steps
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC State Views.
20
Discover and monitor DRACs on the SCOM console