Users Guide

To view the alert views that are displayed by the monitoring feature of Dell EMC Windows Server Agent-based and iDRAC7 or
iDRAC8 SNMP Management Pack for PowerEdge servers and workstations:
1. On the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Alerts Views. The alert views displayed by the monitoring feature for PowerEdge servers
and rack workstations are:
● Dell EMC Network Interface Alerts Views—Link-up and Link-down alerts from the discovered NICs.
● Dell EMC Server and Rack Workstation Alerts Views—OMSA alerts from the Dell Server and Rack Workstations.
● Dell EMC Rack Workstation Alert Views
○ Dell EMC Network Interface Alerts—Link-up and Link-down alerts from the discovered NICs.
○ Dell EMC Rack Workstation Alerts—OMSA alerts from Rack Workstations.
See Alert views displayed by different monitoring features on page 42.
3. Select the required Alert View. In the right pane, alerts that meet the criteria—such as alert severity, resolution state, or
alerts that are assigned to you—are displayed.
4. Select an alert to view the details in the Alert Details section.
NOTE: By default, informational alerts are disabled. To enable informational alerts, run the Set Informational Alerts On
task for the Server and Rack Monitoring feature on the Dell EMC Feature Management Dashboard.
Diagram views in the monitoring feature for PowerEdge servers and rack
workstations
About this task
The Dell EMC Diagram Views offer a hierarchical and graphical representation of all Dell EMC PowerEdge servers and supported
rack workstations on the network.
Steps
1. In the left pane of the SCOM console, select Monitoring.
2. Expand Dell EMC > Dell EMC Diagram Views.
3. Go to the Dell EMC Diagram Views folder to view the available diagram views. See Diagram views displayed by different
monitoring features on page 42.
4. Select a required Dell EMC Diagram View to view the hierarchical and graphical representation of the selected Dell EMC
server or rack workstation in the right pane.
5. Select a component in the diagram to view its details in the Detail View section.
Performance and power monitoring views in the monitoring feature for
PowerEdge servers and rack workstations
About this task
To view the Dell EMC performance and power monitoring views on the SCOM console:
Steps
1. In the left pane of the SCOM, select Monitoring.
2. In the Monitoring pane, expand Dell EMC > Dell EMC Performance and Power Monitoring Views.
The following Performance and Power Monitoring views are available:
● Ambient Temperature (Centigrade)
● Amperage (Amps)
● Dell EMC Performance View
● Dell EMC Performance View (iSM)
● Dell EMC Server Performance View
● Disk Performance - iSM (%)
● Energy Consumption (kWh)
● Peak Amperage (Amps)
● Peak Power (Watts)
Discover and monitor PowerEdge servers and rack workstations on the SCOM console
15