Release Notes

Known issues
Table 3. Known issues in Dell EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP Management
Pack for SCOM
Issue ID Functional area Description Workaround/ Resolution
NA Uninstallation After removing the Dell EMC management
packs, the management pack folders are
still displayed on the SCOM console.
Close and reopen the SCOM
console.
NA DRAC Monitoring
feature
Despite updating the default port number,
DRAC running firmware version 3.0 returns
the wrong URL.
None
NA Server and Rack
Workstation Monitoring
feature
Dell EMC PowerEdge Servers that are
discovered through the Dell EMC Server
and Rack Workstation Monitoring feature
are shown with the default logical device
icon.
None
NA Discovery and inventory If the component is under a Software
RAID controller, inventory for Bus Type
and Media Protocol in Virtual Disk are not
supported.
See the iDRAC documentation on
the Dell Technologies support site
for updated support.
NA Discovery and inventory The "Manufacturer" inventory field for
SATA Disks may be incorrectly reported as
"ATA".
None
NA Discovery and inventory If Virtual MAC Address has not been
configured for the NIC, NIC Inventory field
for Virtual MAC Address is displayed as
"00:00:00:00:00:00". This issue affects the
Server and Rack Workstation Monitoring
(Licensed) feature in version 6.3 and the
out-of-band or the agent based monitoring
feature of versions 6.0 and later.
None
NA Enrollment of appliance Names for Groups, object discoveries, KB
articles, and Feature name column of
Feature Management Dashboard are not
changed to Dell EMC.
None
Environment and system requirements
For more information about the hardware and software requirements of Dell EMC Windows Server Agent-based and iDRAC7
or iDRAC8 SNMP Management Pack Version 7.3 for SCOM, see the Support Matrix section in the Dell EMC Windows Server
Agent-based and iDRAC7 or iDRAC8 SNMP Management Pack for Microsoft System Center Operations Manager User Guide at
Dell.com/esmmanuals.
Installation and upgrade considerations
To install or upgrade the Dell EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP Management Pack Version
7.3 for SCOM, see the detailed installation, pre-requisites, configuration, upgrade, and uninstallation instructions in the Dell
EMC Windows Server Agent-based and iDRAC7 or iDRAC8 SNMP Management Pack for Microsoft System Center Operations
Manager User Guide at Dell.com/esmmanuals.
3