Users Guide

Manage Dell EMC devices using the
OMIMSSC appliance
Topics:
• Synchronize data of the devices discovered in the enrolled SCOM with OMIMSSC
• Delete Dell EMC devices from OMIMSSC
Synchronize data of the devices discovered in the
enrolled SCOM with OMIMSSC
Prerequisites
Prerequisites:
Create a credential profile before performing synchronization with the OMIMSSC.
About this task
Based on the type of device you plan to synchronize with OMIMSSC, set the default profile to iDRAC, CMC, or Network Switch
from the drop-down menu. By default, the devices are synchronized after every six hours. To synchronize a device by using the
OMIMSSC appliance, do the following:
Steps
1. In the left pane of SCOM, click Monitoring.
2. Click Dell EMC > Dell EMC OpenManage Integrations Views > Dell EMC OpenManage Integration Dashboard.
The OMIMSSC login page is displayed in the working pane.
3. Enter credentials to log in to OMIMSSC. Enter the username in the format: domain\username.
4. Select Monitoring and click the link corresponding to the device type you want to synchronize:
● To synchronize a PowerEdge server, click View Servers.
● To synchronize CMC or chassis, click View Modular Systems.
● To synchronize network switches, click View Network Switches.
5. On the <Device type> View page, select the device, and then click Synchronize with MSSC.
6. When prompted, click Yes.
Results
A job is created, and the data of the selected devices in the enrolled SCOM are synchronized with OMIMSSC.
Delete Dell EMC devices from OMIMSSC
Steps
1. On the SCOM console, in the left pane, click Monitoring.
2. Click Dell EMC OpenManage Integration Views > OpenManage Integration Dashboard.
3. Log in to OMIMSSC as an administrator.
4. Select Monitoring and select the device type that you want to delete. For example, to delete a server, click View Servers.
A list of devices that are monitored by OMIMSSC is displayed.
5. In the <Device type> View page, select the device.
13
64 Manage Dell EMC devices using the OMIMSSC appliance