Users Guide

Table Of Contents
Protocol / Mechanism Simple Network
Management Protocol
(SNMP)
Symbol EMC NaviSphere CLI
Monitoring
Traps/alerts
Application launch —
Compellent console
Tape Discovery
Classification
Hardware inventory
Monitoring
Traps/alerts
Application launch — Tape
console
Not supported Not supported
a) Requires Modular Disk Storage Manager Controller software installed on the OpenManage Essentials system.
NOTE: Storage devices hosted by the PowerEdge M1000e chassis are not classified under the Storage node of the
chassis until the PowerEdge M1000e chassis is inventoried.
NOTE: When an EqualLogic group that is associated with a NAS appliance is discovered, the EqualLogic group is
displayed in the device tree under NAS Clusters and Storage DevicesDell EqualLogic Groups. However, the members
of the EqualLogic group are displayed only under Dell EqualLogic Groups.
Legend and Definitions
Discovery: Capability to discover the devices on the network.
Correlation: Capability to correlate:
CMC with servers, switches, RAC, and storage.
Discovered server and DRAC, iDRAC, or BMC devices.
Discovered modular systems or switches.
ESX, ESXi, or Hyper-V host and guest virtual machines.
Classification: Capability to classify the devices by type. For example, servers, network switches, storage, and so on.
Hardware Inventory: Capability to obtain detailed hardware inventory of the device.
Monitoring or Health: Capability to obtain health status and connection status of the device.
Traps, alerts, or PETs: Capability to receive SNMP traps from the device.
Application Launch: Provides a right-click action menu item on the discovered device to launch 1x1 console or application.
OpenManage Server Administrator CLI: Capability to run OpenManage Server Administrator supported commands on the
remote (discovered) servers.
Deploy OpenManage Server Administrator: Capability to deploy OpenManage Server Administrator to the remote (discovered)
servers.
Server Updates: Capability to deploy BIOS, firmware, and driver updates to the remote (discovered) servers.
RACADM CLI: Capability to run RACADM tool supported commands on the remote (discovered) devices.
IPMI CLI: Capability to run IPMITool supported commands on the remote (discovered) devices.
Switch Role: Indicates the type of the unit, such as management or stack.
58