Users Guide

Table Of Contents
Field Description
current value will be retained on the target device. You can
select all the attributes in the template by selecting the check
box in the Deploy column header.
Modified Displays if you have modified the attributes.
NIC Displays the Fully Qualified Device Descriptor (FQDD) of the
NIC.
Fabric Displays the fabric associated with a specific slot of the chassis.
The fabric is identified by a combination of the group name (A,
B, or C) and slot number (1 or 2).
Tagged VLAN(s) Field to enter the tagged VLANs values.
Untagged VLAN Field to enter the untagged VLAN value.
Device Configuration Setup Wizard
The Device Configuration Setup Wizard guides you through the steps to get started with the configuration deployment and
compliance tasks.
NOTE: The Device Configuration Setup Wizard is only displayed if you try to perform a task that is missing required
information.
File Share Settings
The fields displayed in the File Share Settings page are described in the following table.
Table 70. File Share Setting
Field Description
Domain \ Username User name to access the file share on the server running
OpenManage Essentials.
Password Password to access the file share on the server running
OpenManage Essentials..
File Share Status Indicates the status of the deployment file share configuration.
Add Devices to Repurpose and Bare Metal Device Group
NOTE: Adding devices to the Repurpose and Bare Metal Device Group is applicable only for the device configuration
deployment task.
NOTE: Servers that you add to the Repurpose and Bare Metal Device Group must have the
OpenManage Essentials —
Server Configuration Management
license installed.
The Add Devices to Repurpose and Bare Metal Device Group page displays the servers and chassis that you can add to the
Repurpose and Bare Metal Device Group.
Create Template Wizard
The following table describes the fields displayed in the Create Template Wizard.
162