Release Notes

Description: For EqualLogic storage arrays, the Alert Details window displays an incorrect alert

description. [62474]

Remote Tasks

• OpenManage Essentials supports iSM deployment on servers running Community Enterprise

Operating System (CentOS).

Issue 1:

Description: The task targets tree is not expandable when iDRAC Service Module Deployment task is

opened in view mode. [51128]

Resolution: Open the corresponding task in edit mode to view the selected targets.

Issue 2:

Description: The iDRAC Service Module deployment task is unsuccessful when parameters are provided

for installing selective components. [52132]

Resolution: Perform one of the following:

• Create the iDRAC Service Module deployment task without any parameters, and then run the task.

After the deployment is completed, open the iDRAC web interface and enable or disable the

components.

• Include the MAIN_FEATURE parameter along with the parameter you want to use. For example,

ADDLOCAL=OSInfo,MAIN_FEATURE.

Issue 3:

Description: Target selection changes made to a remote task are applied to other remote tasks, if the

tasks are created in quick succession. [49249]

Resolution: Right-click and delete the affected remote tasks, and re-create the required remote tasks.

Issue 4:

Description: While deploying iSM on servers running Linux with OMSA version 7.4 or earlier, the

deployment task may display a success message, even though the task actually failed because of

dependency issues. To confirm if the task was successful or failed, you can see the task details.[48523]

Issue 5:

Description: The OMSA deployment task displays success, even if OMSA is not installed because the

selected OMSA package is not supported on the target device. [45910]

Issue 6:

Description: The iDRAC Service Module (iSM) deployment task is unsuccessful when deploying iSM

version 1.0 on a target device running Linux operating system.

Resolution: Ensure that the dependency packages/executables required for iSM deployment are installed

on the target device, and then run the task again. For information on the dependency files, see the Linux