Users Guide

Field Description
Device Status Interval Set frequency of the device status poll in intervals
of days, hours, and minutes. The status polling
does not begin until the previous polling has
completed.
Days—Specify the number of days between device
status polling.
Hours—Specify the number of hours between
device status polling cycles.
Minutes—Specify the number of minutes between
device status polling cycles.
The maximum discovery interval is 365 days, 23
hours, and 59 minutes.
Status Polling Speed Set the amount of resources available for
accelerating the device status polling speed. The
faster you set the status speed, the more resources
are required, but less time is required to perform
the status polling.
Related Concepts
Status Schedule
Discovery Ranges
The Discovery Ranges section displays all the IP address or IP address ranges that you have configured
for discovery. The icon displayed beside the discovery range varies based on the type of wizard used for
discovery.
• If you configure a discovery range using the Standard Wizard the icon is displayed.
• If you configure a discovery range using the Guided Wizard, the icon is displayed.
– If you discover a chassis using the Guided Wizard, the chassis range group displays the icon is
displayed. The members of the chassis range group that are dynamically discovered display the
icon. If the chassis range group is disabled, the icon is displayed. If the members of the range
group are disabled, the icon is displayed.
You can also right-click a discovery range to see the options available on the discovery range. For
information on the right-click options, see Managing Include Ranges.
Exclude Ranges
The Exclude Ranges section displays the IP address or IP address ranges that you have configured to
exclude from the discovery process.
94