Users Guide

NOTE: Correlation of PowerEdge FC430, FC630, or FC830 sleds under the host chassis is not

supported in the following scenarios:

• The sleds are discovered using WMI protocol (in-band) and do not have OMSA installed.

• The sleds are discovered using IPMI protocol (out-of-band).

• The sleds are running ESXi and either have or do not have OMSA installed.

Supported Storage Devices, Protocols, and Features

Matrix

NOTE: For a description of the features listed in the following table, see Legend and Definitions.

Protocol / Mechanism Simple Network

Management

Protocol (SNMP)

Symbol EMC NaviSphere CLI

Storage

Devices

Dell EqualLogic Discovery

Classification

Hardware inventory

Monitoring

Traps/alerts

Application launch —

EqualLogic console

NOTE: It is

recommended

that you discover

EqualLogic

storage arrays

using the Group

Management IP

or Storage Group

IP only, and not

include any of

the member IPs

in the discovery

range

configuration.

Not supported Not supported

Dell|EMC Discovery

Classification

Traps/Alerts

Not supported Hardware inventory

Monitoring

Application launch —

EMC Navisphere

Manager