Users Guide

To associate target devices to a template:
1. Click Manage → Configurations.
2. Perform one of the following:
• In the Common Tasks pane, click Associate Devices to a Template.
• In the Device Configuration Compliance Portal pane, click Getting Started for Compliance →
Associate Template to Target Devices.
The Associate to Template wizard is displayed.
3. On the Select Template page:
a. Based on the target device type, click either Server Template or Chassis Template.
NOTE: Only configuration templates that you have either created or cloned are available for
selection.
b. Select a device configuration template from the list.
c. Click Next.
4. On the Select Devices page, select the target devices from the All Applicable Devices tree, and then
click
Finish.
Related References
Template Association
Associate Devices To Template Wizard
Viewing the Device Configuration Inventory
You can view the configuration inventory of a device through the Devices portal.
Before you begin, ensure that the device for which you want to view the configuration inventory, meets
the requirements specified in Device Requirements for Deployment and Compliance Tasks.
To view the configuration inventory:
1. Click Manage → Devices.
The Devices portal is displayed.
2. On the device tree, right-click the device for which you want to view the configuration inventory
details, click Device Configuration → Refresh Device Configuration Inventory.
3. On the right pane, click Configuration → Inventory.
The inventory configuration details are displayed. If the inventory configuration task has not been run
for the device, the Run Configuration Inventory button in is displayed. You can click Run
Configuration Inventory to view the configuration details, provided you have configured the
credentials of the device in the Inventory Configuration Schedule.
Related References
Device Requirements for Deployment and Compliance Tasks
Viewing the Device Compliance Status
Before you can view the compliance status of a device to an associated configuration template, you must
run the device configuration inventory task. To run the device configuration inventory task, you can either
create an inventory configuration schedule or select the device in the device tree and click Run
Configuration Inventory on the Configuration tab in the right pane.
221