Users Guide

When a PowerEdge FX chassis is selected in the device tree, a graphical representation (Chassis View) of
the front of the chassis is displayed in the device details page. The inventory information of the chassis is
displayed under the Chassis View.
NOTE: The Chassis View is only displayed if the PowerEdge FX chassis is discovered using the WS-
Man protocol, and at least one of the slots is occupied by a sled.
Figure 4. Chassis View
Tool Tip and Device Selection
Moving the mouser pointer over a slot on the chassis displays a yellow rectangular box around the slot
and a tool tip.
NOTE: The tool tip is only displayed if the slot has a sled installed.
The information displayed in the tool tip varies based on the discovery and inventory status of the sleds. If
a sled that contains multiple compute nodes (For example, PowerEdge FM120x4) is discovered and
inventoried, the tool tip displays the:
• Slot name
• Health status
• Connection status
If any other compute sled is discovered and inventoried and for storage sleds, the tool tip displays the:
• Slot name
• Sled model
• Service Tag
• Asset tag
• Health status
116