Release Notes

Issue 49:
Description
HA Clusters can be discovered using SNMP only. The discovery task that is intended to discover HA
Clusters must have SNMP enabled and the associated credentials must be correct for the target devices.
In order for the members to be discovered, the IP address of each cluster member must be included in
the list of addresses to be discovered by the discovery task.
When discovering HA Clusters, the cluster name may replace the name of the active cluster node. To
avoid this, do not include the cluster IP address in the discovery range.
If the cluster IP address is the only IP address in the discovery task that is related to the HA Cluster, the
currently active cluster node will be discovered and its name will be the same as that of the cluster itself.
This results in the cluster name appearing in several places under the All Devices organizational view.
Another option which helps with cluster discovery is setting the name resolution to NetBIOS instead of
DNS names and running the discovery.
Issue 50:
Description
For Dell’s 13th Generation of PowerEdge servers discovered using out-of-band method, the system
uptime displayed in OpenManage Essentials may not match with the actual system uptime. [51626]
Issue 51:
Description
OpenManage Essentials may not display the appropriate version in the inventory for OpenManage
Storage Servcies (OMSS) version 8.0.2. [51149]
Issue 52:
Description:
After replacing a server (source) with another server (target) from a compute pool, if the operating
system IP address is discovered again, drill-down of the IP address on the Discovery and Inventory page
displays both the source and target servers. [61513]
Resolution:
Delete both the servers and then discover the servers again.
Issue 53:
Description:
In OpenManage Essentials version 2.1, when the iDRAC and the server with the iDRAC are correlated:
• Deleting the discovery range of the iDRAC removes the iDRAC details in the NIC Information table of
the server. However, the iDRAC is not removed from the device tree.
• Deleting the discovery range of the server removes the server details in the NIC Information table of
the iDRAC. However, the server is not removed from the device tree. [61985]
Issue 54:
Description
For EqualLogic PS4210 storage arrays with EqualLogic firmware version 8.0.4, the Application Launch
option is disabled. [62421]