Release Notes

Issue 34:
Description
Even after performing inventory on the discovered Linux servers 'N' number of times, the Linux servers
are still listed under Non-Inventoried systems'.
Resolution
To resolve this issue perform the following steps:
For Red Hat Enterprise Linux 5.5, SUSE Linux Enterprise Server 10, SUSE Linux Enterprise Server 11
1. Mount the OpenManage Server Administrator DVD in the Linux server
2. Install 'srvadmin-cm' rpm.
3. Restart the OpenManage Server Administrator services.
4. Ensure that the OpenManage Server Administrator inventory collector is working fine
(Run ./invcol -outc=/home/inv.xml from /opt/dell/srvadmin/sbin/invcol location)
5. Re-inventory the Linux server in OpenManage Essentials.
6. Now the Linux server will be listed either under 'Compliant systems' or 'Non-Compliant systems'.
Issue 35:
Description
An exception might be seen in the OpenManage Essentials console, when a discovered virtual machine
of a VMware Classic ESX server is selected from the "Unknown" node in the "All Devices" tree. [516274]
Issue 36:
Description
The RAC console application launch point is available when SNMP protocol is used to discover the DRAC
(Dell Remote Access Controller) devices. [515308]
Issue 37:
Description
To properly discover, inventory, and classify a Dell server running ESXi 5.0 you must install OpenManage
Offline Bundle and VIB 6.5 A02 from support.dell.com. For more information about this, see
delltechcenter.com/ome.
Issue 38:
Description
When you create a custom group you have the ability to select a pre-defined device search query or the
ability to select individual devices and groups to form your newly created custom group.
If you select a device search query as your basis for your custom group content and you subsequently
decide to modify the device search query, the results of the modified device search query is not reflected
in the custom group. You will have to delete the custom group and recreate it using the newly modified
device search query group.
If you create a custom group using a device search query, you subsequently modify the device search
query and then attempt to edit the custom group that used the device search query in question, the
original device search query group gets deleted. So, once you create a custom group based on a device
search query, do not edit it. If you need to modify it, delete it first and then re-create it.
Issue 39:
Description
When a Dell PowerConnect 8100 series switch is discovered, the MAC address associated with the
management IP in the NIC Information table will be displayed as “N/A” in OpenManage Essentials.