Users Guide

• Click Home → Map View.
• Click Manage → Devices → Map View.
2. On the Map View, right-click the location you want to remove and select Remove Location.
The Delete Location dialog box is displayed prompting for your confirmation.
3. Click Yes.
Related Links
Using Map View
Exporting All Device Locations
Exporting all device locations allows you to save the information about the devices and their latitude and
longitude coordinates as a .csv file. If the address is known for a pin, it is included in the Description field
of the .csv file. Using this file, you can import the device locations at any time.
NOTE: By default, the latitude and longitude coordinates of each device is saved to the .csv file,
even if the latitude and longitude coordinates were not provided previously.
To export all device locations currently placed on the map:
1. On the Map View, move the mouse pointer over the Actions menu, and then click Export.
The Save As dialog box is displayed.
2. Browse to the location where you want to save the .csv file, type an appropriate file name, and click
Save.
Related Links
Using Map View
Dell NAS Appliance Support
The following table provides information about discovery and classification, availability of appliance node
information, and alert correlation for supported Dell NAS appliances.
Dell EqualLogic FS7500
with FluidFS Version 1
Dell EqualLogic FS7500
with FluidFS Version 2
Dell PowerVault MD
NX3500 with FuildFS
Version 1
Discovery
and
Classification
Support for discovery using
both the EqualLogic Group
Manager IP and
management IP.
If discovered using the
controller IPs, it results in
multiple entries.
Support for discovery using
both the EqualLogic Group
Manager IPs.
If discovered using the
controller IPs, the device is
classified as Unknown.
Support for discovery using
both the controller IPs.
If discovered using the
PowerVault MD Series array
IP, the device is classified as
a PowerVault MD Array
device.
Appliance
Node
Information
Displayed in the device
inventory.
Displayed in the device
inventory.
Displayed in the device
inventory.
Alerts Alerts received from the
controller are not
correlated to the device.
Alerts received from the
controller are not
correlated to the device.
Some alerts received from
the device may be displayed
as Unknown.
104