Owner's Manual


Issue 7:
Description
vFlash information is displayed in the iDRAC Information table in the device inventory even though this
information does not belong to the iDRAC information section. [41115]
Issue 8:
Description
The Service Tag may not be displayed correctly in the device inventory for certain PowerVault MD Series
storage arrays. [40631]
Issue 9:
Description
OEM devices discovered using the SNMP or WS-Man protocol are classified under Modular Systems in
the device tree. [40572]
Issue 10:
Description
When a PowerEdge FX2s chassis is discovered using WS-Man protocol, the host name of the
corresponding mapped sled is not displayed in the PCIe Slot Information table in the device
inventory. [37351]
Issue 11:
Description
When a PowerEdge FM120x4 sled is discovered in-band using SSH protocol, the Embedded Device
Information table is not displayed in the device inventory. [39312]
Issue 12:
Description
When a PowerEdge FM120x4 sled is discovered using SNMP+WMI protocol, the Software Inventory Table
displays multiple entries for the iDRAC version. [39428]
Issue 13:
Description
If a device is not configured with the system contact details, the "Contact Information" table is not
displayed in the device inventory information. [36733]
Issue 14:
Description
If the PowerEdge RAID Controllers (PERC) in a PowerEdge VRTX chassis have different versions of
firmware installed, the "Software Inventory Information" table displays only the PERC with the main
controller firmware version. [39761]
Resolution
Make sure you update the firmware version of the PERC manually in the Chassis Management Controller
console.
Issue 15:
Description
Dell EqualLogic FS7500 NAS device discovered using the management or member IP is displayed as
Unknown in the device tree. [39618]
Resolution
Discover the Dell EqualLogic FS7500 NAS device using the group manager IP.