Users Guide

Field Description
Attributes for Displays the name of the selected device
configuration template.
Device Specific Attributes for Displays the following:
• For a deployment task — The device name,
Service Tag, and device model.
• For an auto deployment task — The Service Tag
of the device to be discovered later.
Deploy Select to deploy an attribute. If you do not select
an attribute, the attribute value is not deployed on
the target device and the current value will be
retained on the target device. You can select all
the attributes in the template by selecting the
check box in the Deploy column header.
Modified Displays if you have modified the value of the
attribute.
Section Displays the component the attribute belongs to.
For example, iDRAC, BIOS, NIC, and so on.
Instance Displays the instance of the component the
attribute belongs to.
Attribute Name Displays the name of the attribute.
Value Displays the value of the attribute.
Dependencies Displays if the attribute is dependent on any other
attributes. To edit a dependent attribute, you must
first set the primary attribute.
Destructive Displays if deploying the attribute may result in
destructive changes to the device configuration
including performance, connectivity, and ability to
boot the device.
Undo Click to undo the changes made to the
configuration template.
Save Click to save the changes to the configuration
template.
Device Specific Attributes
The fields displayed in the Device Specific Attributes tab of the Edit Attributes page are described in the
following table.
145