Users Guide

boots to the network ISO image, you must launch the iDRAC virtual console and select the options for
deploying the ISO image.
Related References
Deploy Template Wizard
Device Configuration Setup Wizard
Device Requirements for Deployment and Compliance Tasks
Removing Devices From the Repurpose and Bare Metal
Devices Group
You can remove devices from the Repurpose and Bare Metal Device group after the device configuration
deployment, network ISO image deployment, auto deployment task is complete.
To remove devices from the Repurpose and Bare Metal Devices group:
1. Click Deployment → Deployment Portal.
2. In the Repurpose and Bare Metal Devices tab, select the devices you want to remove.
3. Perform one of the following:
• Click Remove Selected Devices.
• Right-click and select Remove.
4. On the confirmation dialog box, click Yes.
The devices are removed from the Repurpose and Bare Metal Devices tab in the right pane, and in
the Repurpose and Bare Metal Devices group in the device tree.
Related References
Repurpose and Bare Metal Devices
Auto Deploying Device Configurations
The Setup Auto Deployment task enables you to deploy either a device configuration or network ISO
image on target devices that you will discover at a later time. For example, if your company has ordered
500 systems that are expected to be delivered through the next two weeks, you can create the Setup
Auto Deployment task that runs periodically and deploys the configuration after the devices are
discovered.
When creating the task, you must import a .csv file that includes the Service Tags or node IDs of target
devices on which you want to deploy the configuration. By default, the Setup Auto Deployment task is
run every 60 minutes to identify if the target devices have been discovered. If a target device is
discovered, the device configuration is automatically deployed to the target device. You can also modify
the recurrence of the Setup Auto Deployment task based on your preference.
Related Tasks
Configuring Auto Deployment Settings
Setting Up Device Configuration Auto Deployment
Managing Auto Deployment Credentials
Adding a Discovery Range for Auto Deployment
Configuring Auto Deployment Settings
The Auto Deployment Settings allows you to perform the following:
128