User's Manual

3. Click Yes.
Related Links
Using Map View
Exporting All Device Locations
Exporting all device locations allows you to save the information about the devices and their latitude and
longitude coordinates as a .csv file. If the address is known for a pin, it is included in the Description field
of the .csv file. Using this file, you can import the device locations at any time.
NOTE: By default, the latitude and longitude coordinates of each device is saved to the .csv file,
even if the latitude and longitude coordinates were not provided previously.
To export all device locations currently placed on the map:
1. On the Map View, move the mouse pointer over the Actions menu, and then click Export.
The Save As dialog box is displayed.
2. Browse to the location where you want to save the .csv file, type an appropriate file name, and click
Save.
Related Links
Using Map View
Support For PowerEdge FX Chassis Sleds
The PowerEdge FX2s chassis supports PowerEdge FC620 and FC420 sleds and the PowerEdge FX2
enclosure supports PowerEdge FM120x4, FC620, and FC420 sleds. Discovery and classification of
PowerEdge FC620, FC420, and FM120x4 sleds can be performed using OMSA (in band) or iDRAC (out-
of-band).
NOTE: For in-band (without OMSA) discovery and monitoring of the PowerEdge FM120x4 sled,
make sure that either the WMI or SSH protocol is enabled and setup.
The PowerEdge FM120x4 sled contains four server nodes. When the server nodes in the PowerEdge
FM120x4 sled are discovered, they are displayed in the device tree under:
All Devices → Modular Systems
→ PowerEdge FX → Chassis Group → Sled Group → Server Node. Each server node is displayed under
the sled it belongs to. The Sled Group name in the device tree can be edited if necessary.
NOTE: Devices installed in the PowerEdge FX chassis are sorted based on the device name and not
based on the slot number in the device tree.
Dell NAS Appliance Support
The following table provides information about discovery and classification, availability of appliance node
information, and alert correlation for supported Dell NAS appliances.
Dell EqualLogic FS7500
with FluidFS Version 1
Dell EqualLogic FS7500
with FluidFS Version 2
Dell PowerVault MD
NX3500 with FuildFS
Version 1
Discovery
and
Classification
Support for discovery using
both the EqualLogic Group
Manager IP and
management IP
Support for discovery using
both the EqualLogic Group
Manager IP
Support for discovery using
both the controller IPs
If discovered using the
PowerVault MD Series array
99