Release Notes

Issue 30:
Description
When a XenServer is discovered using SSH, the MAC address is not displayed in the same column for the
IP address.
Alerts
OpenManage Essentials can receive and process alerts from systems with an IPv4 address format.
Issue 1:
Description
If the intensity of an alert storm increases beyond 5 traps per second, it could take OpenManage
Essentials several minutes to process all the alerts. New alerts that are received in the interim are not
displayed on the console until all the alerts in the storm are processed.
Issue 2:
Description
Alert Actions: Application Launch alert actions do not show the application in interactive mode if the
Microsoft Windows "Interactive Service Detection" service is stopped. To see the applications, you have
to start the service.
Issue 3:
Description
Alerts are not received when "SNMP services" are stopped and started. To resolve this issue, restart the
“DSM Essentials Network Monitor” service.
Issue 4:
Description
For large number of alerts, two auto refreshes are required to show the total alerts and count on the
home page. If the alert count is large, the first refresh fetches and shows only a subset of alerts. The
second refresh displays the entire list.
Issue 5:
Description
If you edited sample alert actions in OpenManage Essentials version 1.0, you must manually clone them
before migration. Those will get overwritten with default sample actions.
Issue 6:
Description
The test trap from PowerVault MD 32xx/32xxi is received in OpenManage Essentials system with IP
0.0.0.0. This is an expected behavior in OpenManage Essentials and any other trap listener.
Issue 7:
Description
While upgrading OpenManage Essentials from version 1.0.1 to 1.2, all the existing Dell Force10 traps are
deleted because OpenManage Essentials version 1.2 installs the tested and verified Dell Force10 trap
definitions. Also, the Dell Force10 traps from the MIB Import Utility are also removed and the severity of
the traps are set as defined in OpenManage Essentials version 1.2. After upgrading to OpenManage
Essentials version 1.2, make sure that you update the associated Event view/action filters for these Dell
Force10 trap definitions, because the previous OpenManage Essentials version 1.0.1 event filters may not
work after the upgrade.