Connectivity Guide

NOTE: The Storage Details Group is introduced in VRTX CMC from this release. The iDRAC and CMC have the same
Storage attributes with some modification in CMC. The Object ID mentioned example:
1.3.6.1.4.1.674.10892. 5.5 .1.20.130.3.1.1 for the table group are attributes for checking on iDRAC. To check the corresponding
set of attributes for VRTX CMC systems, use the Object ID example: 1.3.6.1.4.1.674.10892. 2.6 .1.20.130.3.1.1.
Table 562. Enclosure Number
Name
enclosureNumber
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.1
Description Instance number of this enclosure/backplane.
Syntax INTEGER
Access not-Accessible
Table 563. Enclosure Name
Name
enclosureName
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.2
Description The enclosure/backplane's name as represented in Storage Management.
Syntax DisplayString
Access read-only
Table 564. Enclosure State
Name
enclosureState
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.4
Description The current state of this enclosure/backplane. Possible states:
1. The current state could not be determined.
2. The enclosure is operating normally.
3. The enclosure has encountered a hardware problem or is not responding.
4. The enclosure is no longer connected to the controller or there exists a
problem communicating to the enclosure.
5. The enclosure is unstable.
6. The enclosure is inactive due to being configured by another controller.
7. The enclosure is offline and inAccessible.
8. The enclosure is online and Accessible.
9. The enclosure is currently blocked by another controller.
Syntax INTEGER
Access read-only
Table 565. Enclosure Service Tag
Name
enclosureServiceTag
Object Id 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.8
Description Enclosure identification used when consulting customer support.
Syntax DisplayString
Access read-only
126 iDRAC MIB