Connectivity Guide

Table 21. Amperage Probe State Settings
Name
amperageProbeStateSettings
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.4
Description. This attribute defines the state settings of the amperage probe.
Syntax StateSettingsFlags
Access Read-only
Table 22. Amperage Probe Status
Name
amperageProbeStatus
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.5
Description This attribute defines the probe status of the amperage probe.
Syntax StatusProbeEnum
Access Read-only
Table 23. Amperage Probe Reading
Name
amperageProbeReading
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.6
Description This attribute defines the reading for an amperage probe of type other than
amperageProbeTypeIsDiscrete. When the value for amperageProbeType is
amperageProbeTypeIsPowerSupplyAmps or amperageProbeTypeIsSystemAmps, the
value returned for this attribute is the power usage that the probe is reading in tenths
of Amps. When the value for amperageProbeType is amperageProbeTypeIsDiscrete, a
value is not returned for this attribute.
Syntax Signed32BitRange
Access Read-only
Table 24. Amperage Probe Type
Name
amperageProbeType
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.7
Description This attribute defines the type of the amperage probe.
Syntax AmperageProbeTypeEnum
Access Read-only
Table 25. Amperage Probe Location Name
Name
amperageProbeLocationName
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.8
Description This attribute defines the location of the amperage probe.
Syntax String64
Access Read-only
Table 26. Amperage Probe Upper Non Recoverable Threshold
Name
amperageProbeUpperNonRecoverableThreshold
Object ID 1.3.6.1.4.1.674.10892.5.4.600.30.1.9
Description This attribute defines the upper non recoverable threshold of the amperage probe. The
value is an integer representing the amperage of the threshold in milliamps.
12 Introduction