Connectivity Guide

Table 526. Physical Disk T10 PI Capability (continued)
Description Indicates whether the physical disk supports the T10 PI (Protection
Information). These protection fields are known as DIF (Data Integrity Fields).
Possible values:
1. Not one of the following.
2. Capable of supporting T10 PI.
3. Not capable of supporting T10 PI.
Syntax INTEGER
Access read-only
Table 527. Physical Disk Block Size In Bytes
Name
physicalDiskBlockSizeInBytes
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.58
Description The block size (in bytes) of the physical disk. This is not applicable for NVMe
devices. Possible values:
1. 512
2. 4096
Syntax INTEGER
Access read-only
Table 528. Physical Disk Protocol Version
Name
physicalDiskProtocolVersion
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.59
Description Applicable for NVMe devices only. The NVMe protocol version supported by the
device.
Syntax DisplayString
Access read-only
Table 529. Physical Disk PCIe Negotiated Link Width
Name
physicalDiskPCIeNegotiatedLinkWidth
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.60
Description Applicable for NVMe devices only. The PCIe link width negotiated with the host during
device initialization.
Syntax INTEGER
Access read-only
Table 530. Physical Disk PCIe Capable Link Width
Name
physicalDiskPCIeCapableLinkWidth
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.61
Description Applicable for NVMe devices only. The PCIe link widths the device is capable of
supporting.
Syntax INTEGER
Access read-only
iDRAC MIB 117