Connectivity Guide

Table 489. Controller T10 PI Capability (continued)
Description Description Indicates whether the controller supports the T10 PI (Protection
Information). These protection fields are known as DIF (Data Integrity
Fields).Possible values:
1. Not one of the following.
2. Capable of supporting T10 PI.
3. Not capable of supporting T10 PI.
Syntax INTEGER
Access read-only
Table 490. Controller RAID10 Uneven Spans Supported
Name
controllerRAID10UnevenSpansSupported
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.81
Description Indicates whether uneven spans for RAID 10 virtual disk is supported on the
controller.
Syntax BooleanType
Access read-only
Table 491. Controller Enhanced Auto Import Foreign Config Mode
Name
controllerEnhancedAutoImportForeignConfigMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.82
Description Indicates the status of enhanced auto-import of foreign configuration property of the
controller. Possible values:
1. Not one of the following.
2. Not Supported.
3. Disabled.
4. Enabled.
Syntax INTEGER
Access read-only
Table 492. Controller Boot Mode Supported
Name
controllerBootModeSupported
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.83
Description Indicates whether headless boot mode settings are supported on the controller.
Syntax BooleanType
Access read-only
Table 493. Controller Boot Mode
Name
controllerBootMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.84
Description Indicates the boot mode of the controller. Possible values:
1. Not applicable for this controller.
108 iDRAC MIB