Connectivity Guide

Table 480. Controller Copy Back Mode (continued)
5. Copyback mode is disabled
Syntax INTEGER
Access read-only
Table 481. Controller Security Status
Name
controllerSecurityStatus
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.72
Description The controller's current security/encryption status. Possible values:
1. The current status could not be determined.
2. Controller is not operating in an encryption mode.
3. Controller is operating in the Local Key Management (LKM) encryption mode.
Syntax INTEGER
Access read-only
Table 482. Controller Encryption Key Present
Name
controllerEncryptionKeyPresent
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.73
Description Indicates whether encryption key is assigned for the controller.
Syntax BooleanType
Access read-only
Table 483. Controller Encryption Capability
Name
controllerEncryptionCapability
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.74
Description The type of encryption supported by the controller. Possible values:
1. Not one of the following.
2. No encryption supported.
3. Local Key Management.
Syntax INTEGER
Access read-only
Table 484. Controller Load Balance Setting
Name
controllerLoadBalanceSetting
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.75
Description The ability of the controller to automatically use both controller ports (or connectors)
connected to the same enclosure in order to route I/O requests. Possible values:
1. Not one of the following.
2. Not supported.
3. Automatic load balancing is active.
106 iDRAC MIB