Connectivity Guide

Table 476. Controller Spin Down Hot Spare Drives
Name
controllerSpinDownHotSpareDrives
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.61
Description Indicates whether hot spare drives would be put in power save mode by the controller.
Syntax BooleanType
Access read-only
Table 477. Controller Spin Down Time Interval
Name
controllerSpinDownTimeInterval
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.62
Description The duration in minutes after which, the unconfigured or hot spare drives will be spun
down to power save mode.
Syntax INTEGER
Access read-only
Table 478. Controller Preserved Cache
Name
controllerPreservedCache
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.69
Description Indicates whether preserved cache or pinned cache is present on the controller.
Syntax BooleanType
Access read-only
Table 479. Controller Check Consistency Mode
Name
controllerCheckConsistencyMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.70
Description The current check consistency mode setting for the controller. Possible values:
1. Not one of the following.
2. Not supported on this controller.
3. Normal check consistency operation.
4. Check consistency operation will stop on encountering an error.
Syntax INTEGER
Access read-only
Table 480. Controller Copy Back Mode
Name
controllerCopyBackMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.71
Description The current copy back mode setting for the controller. Possible values:
1. Not one of the following.
2. Not supported on this controller.
3. Disks assigned as spares could revert back to spare status.
4. Data from physical disk participating in a virtual disk could be automatically copied
to the assigned hot spare in case former has a predictive failure event.
iDRAC MIB 105