Connectivity Guide

Table 471. Controller Check Consistency Rate (continued)
Description The check consistency rate is the percentage of the controller's resources dedicated
to performing a check consistency on a redundant virtual disk.
Syntax INTEGER
Access read-only
Table 472. Controller Patrol Read Mode
Name
controllerPatrolReadMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.52
Description Identifies the patrol read mode setting for the controller. Possible values:
1. Not one of the following or could not be determined
2. Not Supported on this controller
3. Disabled
4. Automatic
5. Manual
Syntax INTEGER
Access read-only
Table 473. Controller Patrol Read State
Name
controllerPatrolReadState
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.53
Description This property displays the current state of the patrol read process. Possible values:
1. Not one of the following or could not be determined
2. Patrol read is not running
3. Patrol read is running
Syntax INTEGER
Access read-only
Table 474. Controller Persistent Hot Spare
Name
controllerPersistentHotSpare
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.59
Description Indicates whether hot spare drives would be restored on insertion into the same slot.
Syntax BooleanType
Access read-only
Table 475. Controller Spin Down Unconfigured Drives
Name
controllerSpinDownUnconfiguredDrives
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.60
Description Indicates whether un-configured drives would be put in power save mode by the
controller.
Syntax BooleanType
Access read-only
104 iDRAC MIB