CLI Guide

○ Command also supports VLAN Configuration.
• -v—VLAN settings has the following legal values:
○ If there are no arguments, it implies that the VLAN tag must be removed.
○ <vlan_id> : 1-4000, 4021-4094
NOTE: Disable the DHCP option to configure the static IP.
Example
• Enable DHCP for a switch:
racadm setniccfg -m switch-1 -d
• To Enable Autoconfiguration for ipv6
racadm setniccfg -m chassis -d -6
• Configuration of switch to a static IPv4 address:
racadm setniccfg -m switch-1 -s 192.168.0.120 255.255.255.0 192.168.0.1
• Configuration of chassis to a static IPv6 address:
racadm setniccfg -m chassis -s -6 2001:DB8::2 64 2001:DB8::1
• Configuration of VLAN id for chassis:
racadm setniccfg -m chassis -v 1000
• Removal of VLAN configuration from a chassis:
racadm setniccfg -m chassis -v
swinventory
Description
Displays the list of the software objects installed in the chassis.
Synopsis
racadm swinventory
Input
racadm swinventory
Example To view the software inventory:
racadm swinventory
traceroute
Description
Prints the route packets trace to the network host.
Synopsis
racadm traceroute <host>
Input <host>—The IPv4 address or hostname of the remote endpoint to trace.
Example To execute a trace route for IP address 192.168.0.2:
racadm traceroute 192.168.0.2
24 RACADM sub command details