CLI Guide

A N/A
5 SLOT-5 ON 227 W
1 PowerEdge MX740c
6 SLOT-6 ON 228 W
1 PowerEdge MX740c
7 SLOT-7 ON 240 W
1 PowerEdge MX740c
8 SLOT-8 ON 622 W
1 PowerEdge MX740c
getpminfo
Description Gets power management status information.
Synopsis
racadm getpminfo
Input
racadm getpminfo
Example
[Real-Time Power Statistics]
System Input Power = 616 W (2101 BTU/h)
Peak System Power = 628 W (2142 BTU/h)
Peak System Power Start Time = Not Applicable
Peak System Power Timestamp = 11:37:36 08/08/2018
Minimum System Power = 606 W (2067 BTU/h)
Minimum System Power Start Time = Not Applicable
Minimum System Power Timestamp = 10:16:08 08/06/2018
System Idle Power = Not Applicable
System Potential Power = Not Applicable
System Input Current Reading = Not Applicable
[Real-Time Energy Statistics]
System Energy Consumption = 204 kWh
System Energy Consumption Start Time = Not Applicable
System Energy Consumption Timestamp = 05:47:05 08/20/2018
[System Power Status]
Chassis Power State = ON
Overall Power Health = Not OK
Redundancy = No
[System Power Policy Configuration]
System Input Power Cap = Disabled
Redundancy Policy = None
Dynamic PSU Engagement Enabled = Not Applicable
[Power Budgeting]
System Input Max Power Capacity = 11571 W
Input Redundancy Reserve = Not Applicable
Input Power Allocated to Servers = Not Applicable
Input Power Allocated to Chassis Infrastructure = Not Applicable
Total Input Power Available for Allocation = 2384 W (8134 BTU/h)
Standby Input Power Capacity = Not Applicable
getsensorinfo
Description
Displays system sensors.
RACADM sub command details 19