CLI Guide

NOTE: The MXG610s IOM does not support colon, ":", in passwords.
NOTE: You can configure only the "root" user password for servers, using the deploy
command.
• -s— The <ipaddress> <subnet> <gateway> sets static IPV4 network configuration for server. The
<ipAddress>, <netmask>, and <gateway> must be typed as dotted decimal strings.
• -s—The attribute string, -6 <ipv6Address> <prefixlen> <gateway>, sets static IPV6 network
configuration for server. The attributes, <ipv6Address> and <gateway>, must be entered as colon
separated IPV6 strings.
• -d—Enables DHCP for the specified server.
• -d—[-6] : enables DHCP for the specified server. The -6 option enables IPV6 autoconfiguration.
• -v—The SNMPv2 <snmpCommunityString> ro string sets the protocol version to SNMPv2, the
community string, and the permission as read-only. The length of the snmpCommunityString must be 1-20
characters with ASCII value in the 32-125 range.
Example
• Set root password, configure static IPv4 address for server-1
racadm deploy -m server-1 -u root -p <password> -s 192.168.0.20
255.255.255.0 192.168.0.1
• Set root password, configure static IPv6 address for server-1
racadm deploy -m server-1 -u root -p <password> -s -6 2001:DB8::2 64
2001:DB8::1
• Set root password and enable DHCP for server-3
racadm deploy -m server-3 -u root -p <password> -d
• Set root password and enable IPv6 DHCP for server-3
racadm deploy -m server-3 -u root -p <password> -d -6
• Set password for switch-1
racadm deploy -m switch-1 -u root -p <password>
• Set SNMP community string for switch-1
racadm deploy -m switch-1 -v SNMPv2 DemoCommunityString ro
• Set root password to "calvin" for all servers
racadm deploy -a -u root -p calvin
• Set password for all switches
racadm deploy -a switch -u root -p <password>
faultlist
Description
Displays the active error message in the chassis subsystem.
Synopsis
racadm faultlist view
$ racadm faultlist view
Example
SubSystem = System.Modular.7
Message = CPU 1 is absent
InstanceId = Fault#02200004#1
RACADM sub command details 15