API Guide

]
}
Table 42. Attributes
Attribute name Description
Id ID of the syslog configuration.
Enabled Indicates if syslog is enabled or disabled.
DestinationAddress Destination address of syslog.
PortNumber Port number of syslog.
NOTE: By default, you can configure up to four destinations for syslog/SNMP and the responses are sent to each
destination. If there is no information in the response, PortNumber is displayed as 0.
api/AlertService/AlertDestinations/Actions/
AlertDestinations.ApplySyslogConfig
POST method for AlertDestinations.ApplySyslogConfig
This method configures the syslog.
Description
Configures the syslog.
Privilege MONITORING_SETUP
HTTP response
codes
200
Example request
body
[
{
"Enabled": true,
"DestinationAddress": "100.97.10.17",
"PortNumber": 514
},
{
"Enabled": true,
"DestinationAddress": "100.97.10.17",
"PortNumber": 514
},
{
"Enabled": true,
"DestinationAddress": "10.19.12.1",
"PortNumber": 514
},
{
"Enabled": true,
"DestinationAddress": "100.97.1.23",
"PortNumber": 514
}
]
Example response
body
[
{
"Id": 1,
"Enabled": true,
"DestinationAddress": "100.97.10.17",
"PortNumber": 514
},
72 Application settings