Release Notes
Table Of Contents
- Dell EMC OpenManage Enterprise-Modular Edition Version 1.00.10 for PowerEdge MX7000 Chassis Release Notes
- Release summary
- Compatibility
- New and enhanced features
- Fixes
- Bandwidth and port details
- Single Sign-On with CSR
- Storage sled and storage IOM updates
- Root password application
- FCoE virtual MAC addresses
- OME-Modular unresponsive
- HTTPS firmware catalog share
- Compute sled firmware updates in member chassis
- Compute sled updates
- Failure of compute sled updates in MCM
- FIPS enabled systems
- Deployment and configuration job
- Migrating profiles
- Firmware update failure
- Login failure
- OME-Modular version information for member chassis
- Failure of compute sled updates in MCM
- Firmware update job status
- Single management module connectivity
- Important Notes
- Known issues
- Unable to restore network configuration attributes
- Fault list does not contain HWC2131
- Chassis KVM output may be lost after AC power outage in chassis
- ISL Cabling Diagram not shown correctly in Microsoft Edge and Internet Explorer
- Unable to view details of template created from a reference device
- Firmware catalog may be deleted automatically after editing
- Error displayed when creating a local user account under certain conditions
- Cannot perform a graceful shut down of all compute sleds
- Check Compliance operation fails to run and no error message is displayed
- Unable to deploy chassis profile after removing syslog or SNMP destinations
- Unable to edit firmware catalog in specific scenarios
- Unable to restore iDRAC from the lead chassis
- Unable to export chassis profile using hostname or FQDN
- Request to join a group fails when using Microsoft Edge or Internet Explorer
- Devices may not appear after being moved from the lead chassis to a member chassis
- Set Proxy operation fails when using a hostname ending with a numeric character
- Using special characters while setting iDRAC password causes error
- Descriptive error not displayed when compute sled is in lockdown mode and VLAN settings are changed
- Last run date for some jobs may be displayed incorrectly after firmware update
- Unable to start MM Update when IOMs or storage components are selected as chassis components while updating firmware from baselines
- IOM firmware updates fail intermittently when IOMs are selected as part of chassis component while updating firmware from baselines
- Multiple Firmware Update jobs start for IOMs or storage devices when IOMs or storage devices are selected while updating firmware from baselines
- OME - Modular slows down while deploying many compute sleds in 20 chassis setup
- PowerEdge MX 10GbT PTM is not displayed on chassis Group Topology page
- MCM Lead chassis does not display alerts from chassis components
- Bandwidth settings are not deployed on IOMs in fabric mode when an imported template is used
- Alerts are not received through SYSLOG, SNMP, or EMAIL after downgrading OME-Modular firmware
- Limitations
- Installation
- Resources and support
- Contacting Dell EMC
Descriptive error not displayed when compute sled is
in lockdown mode and VLAN settings are changed
Description An error message is displayed when you try to change the VLAN setting on the Chassis > Overview
> Hardware > Chassis Slots page when iDRAC is in lockdown mode. But, the error message does not
describe the cause of the failure of the task.
Workaround No action is required. A descriptive error message will be provided in a future update of OME - Modular.
Systems affected PowerEdge MX840c, PowerEdge MX740c
Tracking number 112537
Last run date for some jobs may be displayed
incorrectly after firmware update
Description After firmware update, some jobs may display the last run date as "1970". The issue is only seen when
NTP servers are configured as the time source. After a firmware update, the public network takes some
time to get established, which delays synchronizing the system time with the NTP server. Any jobs run
before the system time synchronizes to the NTP server, display the year as 1970.
Workaround The date and time are fixed automatically when the next job is run.
Systems affected PowerEdge MX7000
Tracking number 115338
Unable to start MM Update when IOMs or storage
components are selected as chassis components while
updating firmware from baselines
Description
IOMs or storage device update does not start when IOMs/Storage devices are selected as chassis
components while performing a Firmware Update from a baseline.
Workaround Select the IOMs/Storage components as individual devices and retry the firmware update.
Systems affected All Systems supported by this release.
Tracking number 115635
IOM firmware updates fail intermittently when IOMs
are selected as part of chassis component while
updating firmware from baselines
Description
IOM updates can fail when IOMs or storage devices are selected as part of the chassis component using
the Compliance Report Update method.
Workaround Selecting the IOMs as individual devices and retry the firmware update.
Systems affected All Systems supported by this release.
Tracking number 115639
18 Known issues