CLI Guide
Table Of Contents
- Dell EMC OpenManage Enterprise Modular Edition for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide
- Contents
- Introduction
- RACADM sub command details
- Guidelines to quote strings containing special characters when using RACADM commands
- Question mark and question mark with subcommand
- help and help with subcommand
- arp
- chassisaction
- chassisgroup
- chassislog
- cmcchangeover
- config
- connect
- deploy
- faultlist
- getconfig
- getmodinfo
- getniccfg
- getpbinfo
- getpminfo
- getsensorinfo
- getsysinfo
- ifconfig
- ping
- ping6
- racreset
- racresetcfg
- serveraction
- setniccfg
- swinventory
- traceroute
- traceroute6
- OpenManage Enterprise Modular property database group and object descriptions
Example
● Displays Chassis Information
racadm getsysinfo -c
● Displays MM Information
racadm getsysinfo -d
ifconfig
Description Displays the network interface information.
Synopsis
racadm ifconfig
ping
Description Sends ICMP echo packets on the network.
Synopsis
racadm ping <ipaddress>
Input <ipaddress>—The IP address of the remote endpoint to ping.
Example To ping ip address 192.168.0.1
racadm ping 192.168.0.1
ping6
Description
Sends ICMP echo packets on the network.
Synopsis
racadm ping6 <ipaddress>
Input <ipaddress>—The IPv6 address of the remote endpoint to ping.
Example To ping ipaddress FE80:0000:0000:0000:0202:B3FF:FE1E:8329
racadm ping6 FE80:0000:0000:0000:0202:B3FF:FE1E:8329
racreset
Description
Resets the RAC.
Synopsis
racadm racreset
racresetcfg
Description
Restores the RAC configuration to factory defaults.
26 RACADM sub command details