CLI Guide
Table Of Contents
- Dell EMC OpenManage Enterprise Modular Edition for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide
- Contents
- Introduction
- RACADM sub command details
- Guidelines to quote strings containing special characters when using RACADM commands
- Question mark and question mark with subcommand
- help and help with subcommand
- arp
- chassisaction
- chassisgroup
- chassislog
- cmcchangeover
- config
- connect
- deploy
- faultlist
- getconfig
- getmodinfo
- getniccfg
- getpbinfo
- getpminfo
- getsensorinfo
- getsysinfo
- ifconfig
- ping
- ping6
- racreset
- racresetcfg
- serveraction
- setniccfg
- swinventory
- traceroute
- traceroute6
- OpenManage Enterprise Modular property database group and object descriptions
PS1 PSU.Slot.1 Online 0.39599 6 A
-48 V 3000 W DC
PS2 PSU.Slot.2 Online 0.38574 2 A
-48 V 3000 W DC
PS3 PSU.Slot.3 Online 0.39794 9 A
-48 V 3000 W DC
PS4 PSU.Slot.4 Online 0.35986 3 A
-48 V 3000 W DC
PS5 PSU.Slot.5 Online 0.41357 4 A
-48 V 3000 W DC
PS6 PSU.Slot.6 Online 0.23584 A
-48 V 3000 W DC
[Server Module Power Allocation Table]
<Slot#> <Server Name> <Power State> <Allocation>
<Priority> <Blade Type>
1 SLOT-1 ON 605 W
1 PowerEdge MX840c
2 Extension (1) N/A N/A
N/A N/A
3 SLOT-3 ON 792 W
1 PowerEdge MX840c
4 Extension (3) N/A N/A
N/A N/A
5 SLOT-5 ON 227 W
1 PowerEdge MX740c
6 SLOT-6 ON 228 W
1 PowerEdge MX740c
7 SLOT-7 ON 240 W
1 PowerEdge MX740c
8 SLOT-8 ON 622 W
1 PowerEdge MX740c
NOTE: The <Input Current> values can be a minimum of two and a maximum of six digits after the decimal.
getpminfo
Description
Gets power management status information.
Synopsis
racadm getpminfo
Input
racadm getpminfo
Example
[Real-Time Power Statistics]
System Input Power = 616 W (2101 BTU/h)
Peak System Power = 628 W (2142 BTU/h)
Peak System Power Start Time = Not Applicable
Peak System Power Timestamp = 11:37:36 08/08/2018
Minimum System Power = 606 W (2067 BTU/h)
Minimum System Power Start Time = Not Applicable
Minimum System Power Timestamp = 10:16:08 08/06/2018
System Idle Power = Not Applicable
System Potential Power = Not Applicable
System Input Current Reading = Not Applicable
[Real-Time Energy Statistics]
System Energy Consumption = 204 kWh
System Energy Consumption Start Time = Not Applicable
System Energy Consumption Timestamp = 05:47:05 08/20/2018
[System Power Status]
22 RACADM sub command details