Users Guide

The Toggle Admin State window is displayed.

Configuring Maximum Transmission Unit

You can configure the Maximum Transmission Unit (MTU) for full-switch and fabric mode IOMs. The MTU can be configured for

the Ethernet ports 1/1/1 to 1/1/16.

To configure MTU:

1. Click Devices > I/O Modules > View Details > Hardware > Port Information.

2. Select the ethernet port and click MTU.

The Configure MTU window is displayed.

3. Select the MTU Size.

The approximate value for MTU is 1500 bytes. The default value is 1532 bytes, and the maximum is 9000 bytes. If the port

has both FCoE and Ethernet, the value is 2500 bytes.

Configuring auto negotiation

You can toggle auto negotiation (AutoNeg) For DAC cabling, the AutoNeg is enabled by default. For AOC (fibre), the AutoNeg is