CLI Guide
Table Of Contents
- Dell EMC OpenManage Enterprise Modular Edition Version 1.00.10 for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide
- Introduction
- RACADM sub command details
- Guidelines to quote strings containing special characters when using RACADM commands
- Question mark and question mark with subcommand
- help and help with subcommand
- arp
- chassisaction
- chassisgroup
- chassislog
- cmcchangeover
- config
- connect
- deploy
- faultlist
- getconfig
- getmodinfo
- getniccfg
- getpbinfo
- getpminfo
- getsensorinfo
- getsysinfo
- ifconfig
- ping
- ping6
- racreset
- racresetcfg
- serveraction
- setniccfg
- swinventory
- traceroute
- traceroute6
- OME Modular property database group and object descriptions
cfgStorageModuleServiceTag
Description Displays the service tag.
Synopsis
cfgStorageModuleServiceTag=<service tag>
Input
cfgStorageModuleServiceTag=<service tag>
Example
cfgStorageModuleServiceTag=MX0000
cfgStorageModuleAssetTag
Description Displays the asset tag.
Synopsis
cfgStorageModuleAssetTag=
Input
cfgStorageModuleAssetTag
Example
cfgStorageModuleAssetTag=xxxxxx
cfgStorageModuleConnectedSlots
Description
Displays the connected slots.
Synopsis
cfgConnectedSlots=<connected slots>
Input
cfgConnectedSlots=<connected slots>
Example
cfgConnectedSlots=2,2,2,2,2,2,2,2
cfgUserAdmin
Description
This group provides configuration information about the users who are allowed to access management
module through the available remote interfaces.
Up to 64 instances of the user group are allowed. Each instance represents the configuration for an
individual user.
NOTE: In the current management module firmware version, the objects cfgUserAdminEnable and
cfgUserAdminPrivilege are interrelated; changing the value of one property causes the value of the
other property to change. For example, if a user does not have login privilege, the user is disabled by
default. When you enable the user by changing the value of the UserAdminEnable to 1, the right-most
digit of the UserAdminPrivilege also becomes 1. On the other hand, if you change the right-most digit
of the UserAdminPrivilege to 0, the value of the UserAdminEnable becomes 0.
28 OME Modular property database group and object descriptions