CLI Guide

OME Modular property database group and
object descriptions
Replace this text with your content.
Topics:
• cfgLanNetworking
• cfgStorageModule
• cfgUserAdmin
• cfgRacTuning
cfgLanNetworking
This group contains parameters to configure OME Modular NIC for IPv4.
One instance of the group is allowed. Some objects in this group may require management module NIC to be reset, which may
cause a brief loss in connectivity. Objects that change management module NIC IP address settings close all active user sessions
and require users to reconnect using the updated IP address settings.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE:
You can configure a setting that does not have a hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following cfgDNSServer are used with the cfgLanNetworking command:
● cfgDNSServersFromDHCP=1
● cfgDNSServer1=
● cfgDNSServer2=
● cfgDNSRegisterRac=0
● cfgDNSRacName=mx-PT0004S
● cfgDNSDomainName=
● cfgDNSDomainNameFromDHCP=0
To change the DNS domain name, run the following commands:
1.
racadm config -g cfglannetworking -o cfgDNSRegisterRac 0
If Register with DNS is currently enabled.
2. racadm config -g cfglannetworking -o cfgDNSDomainNameFromDHCP 0
3. racadm config -g cfglannetworking -o cfgDNSDomainName Spaceisg.com
4. racadm config -g cfglannetworking -o cfgDNSRegisterRac 1
To return to the original state if step 1 is applied.
To change the preferred or alternate DNS name, run the following commands:
1. racadm config -g cfglannetworking -o cfgDNSRegisterRac 0
If Register with DNS is currently enabled.
3
24 OME Modular property database group and object descriptions