CLI Guide
Table Of Contents
- Dell EMC OpenManage Enterprise Modular Edition Version 1.00.10 for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide
- Introduction
- RACADM sub command details
- Guidelines to quote strings containing special characters when using RACADM commands
- Question mark and question mark with subcommand
- help and help with subcommand
- arp
- chassisaction
- chassisgroup
- chassislog
- cmcchangeover
- config
- connect
- deploy
- faultlist
- getconfig
- getmodinfo
- getniccfg
- getpbinfo
- getpminfo
- getsensorinfo
- getsysinfo
- ifconfig
- ping
- ping6
- racreset
- racresetcfg
- serveraction
- setniccfg
- swinventory
- traceroute
- traceroute6
- OME Modular property database group and object descriptions
ping
Description Sends ICMP echo packets on the network.
Synopsis
racadm ping <ipaddress>
Input <ipaddress>—The IP address of the remote endpoint to ping.
Example To ping ip address 192.168.0.1
racadm ping 192.168.0.1
ping6
Description Sends ICMP echo packets on the network.
Synopsis
racadm ping6 <ipaddress>
Input <ipaddress>—The IPv6 address of the remote endpoint to ping.
Example To ping ipaddress FE80:0000:0000:0000:0202:B3FF:FE1E:8329
racadm ping6 FE80:0000:0000:0000:0202:B3FF:FE1E:8329
racreset
Description
Resets the RAC.
Synopsis
racadm racreset
racresetcfg
Description
Restores the RAC configuration to factory defaults.
Synopsis
racadm racresetcfg
Running the racresetcfg command results in the following:
● Clears Management Module Configuration and resets to Initial settings.
● Rediscovers iDRAC.
NOTE: iDRAC discovery may take longer, as the Chassis may not receive the MDNS message from iDRAC immediately.
● Removes the MCM grouping functionality.
NOTE:
The reset_config, reset_all, racresetcfg, FIPS_MODE ON/OFF workflow clear the database and the
user information is not retained. Hence, configuration restoration is logged in DELL_INTERNAL_PROCESS.
NOTE: If the member chassis undergoes a factory reset, it becomes a stand-alone chassis and not a member of the
multi-chassis group. You can remove the member from the lead chassis.
20 RACADM sub command details