CLI Guide

V 3000 W
PS5 PSU.Slot.5 Absent
N/A N/A
N/A
PS6 PSU.Slot.6 Absent
N/A N/A
N/A
[Server Module Power Allocation Table]
<Slot#> <Server Name> <Power State>
<Allocation> <Priority> <B
lade Type>
3 SLOT-3 ON N/A
1 De
ll EMC PowerEdge MX5016s
7 SLOT-7 OFF 192 W
1 Po
werEdge MX740c
getpminfo
Description
Gets power management status information.
Synopsis
racadm getpminfo
Input
racadm getpminfo
Example
[Real-Time Power Statistics]
System Input Power = 616 W (2101 BTU/h)
Peak System Power = 628 W (2142 BTU/h)
Peak System Power Start Time = Not Applicable
Peak System Power Timestamp = 11:37:36 08/08/2018
Minimum System Power = 606 W (2067 BTU/h)
Minimum System Power Start Time = Not Applicable
Minimum System Power Timestamp = 10:16:08 08/06/2018
System Idle Power = Not Applicable
System Potential Power = Not Applicable
System Input Current Reading = Not Applicable
[Real-Time Energy Statistics]
System Energy Consumption = 204 kWh
System Energy Consumption Start Time = Not Applicable
System Energy Consumption Timestamp = 05:47:05 08/20/2018
[System Power Status]
Chassis Power State = ON
Overall Power Health = Not OK
Redundancy = No
[System Power Policy Configuration]
System Input Power Cap = Disabled
Redundancy Policy = None
Dynamic PSU Engagement Enabled = Not Applicable
RACADM sub command details
17