Users Guide

4. Enter the port number for the web server.

You can enter a port number in the 10-65535 range. The default port number is 443.

when the web server https port settings from the lead chassis are applied to member chassis as part of the add or join

member task, refresh the inventory for the lead chassis manually to see the correct https port for the member chassis, on

the Hardware > Device Management Info page. Launch the member chassis from the lead chassis to see the port

number.

Configuring OME–Modular date and time settings

1. Click Application Settings > Network > Time Configuration.

2. Select the Use NTP check box, if required, and enter the NTP server details.

3. Select the desired time zone.

NOTE: Any change in the attribute settings leads to IP drop or unavailability of the OME–Modular web interface for

some time. However, the OME–Modular web interface recovers automatically.

Configuring OME–Modular proxy settings

1. Click Application Settings > Network > Proxy Configuration.

2. Select Enable HTTP Proxy Settings.

3. Enter the proxy address and the port number.

4. If the proxy requires authentication, select Enable Proxy Authentication and enter the credentials.

You can enable proxy authentication only if the Enable HTTP Proxy Settings option is selected.

5. Enter the proxy user credentials.

Changing device naming and preference

1. Click Application Settings > Network > Device Name Preference.

2. Select the naming preference.

Configuring users and user settings

In OME–Modular, you can create up to 64 local users and assign them specific roles and privileges. Using the options available

under Application Settings > Users, you can add and edit users, import a directory group, and view and terminate active user

sessions.

NOTE: You can create, delete, enable, or disable users only if you have the security setup privilege.

Viewing and editing user accounts

1. Click Application Settings > Users

On this page, you can view a list of users accounts and their roles, the user types, and whether the account is enabled or

not.

2. Select a user and click Edit on the right side of the page.

3. Edit the required settings.

NOTE: You can change only the password of the default "root" account.

Adding users

1. Click Application Settings > Users

2. Click Add.

Logging in to OME-Modular