CLI Guide
Table Of Contents
- Dell EMC OpenManage Enterprise Modular Edition for PowerEdge MX7000 Chassis RACADM Command Line Reference Guide
- Introduction
- RACADM sub command details
- Guidelines to quote strings containing special characters when using RACADM commands
- Question mark and question mark with subcommand
- help and help with subcommand
- arp
- chassisaction
- chassisgroup
- chassislog
- cmcchangeover
- config
- connect
- deploy
- faultlist
- getconfig
- getmodinfo
- getniccfg
- getpbinfo
- getpminfo
- getsensorinfo
- getsysinfo
- ifconfig
- ping
- ping6
- racreset
- racresetcfg
- serveraction
- setniccfg
- swinventory
- traceroute
- traceroute6
- OpenManage Enterprise Modular property database group and object descriptions
The management module can obtain its DNS domain name from either a DHCP or DHCPv6 server, if the following properties are
set to 1 (true):
● IPv4Enable
● NIC Enabled
● IPv6 Enabled
● Autoconfiguration Enabled
The network administrator must ensure that these DHCP servers are configured to provide the same DNS domain name to the
management module. Else, the domain name becomes unpredictable.
cfgStorageModule
Description This command is used only with the getconfig command.
Synopsis
Input
●
cfgStorageModuleStorageMode=<storage mode>
●
# cfgStorageModuleServiceTag=<service tag>
●
cfgStorageModuleAssetTag=
●
cfgConnectedSlots=<connected slots>
Example
● cfgStorageModuleStorageMode=2
●
# cfgStorageModuleServiceTag=MX0000
● cfgStorageModuleAssetTag=
●
cfgConnectedSlots=2,2,2,2,2,2,2,2
cfgStorageModuleStorageMode
Description
Displays the storage module.
Synopsis
cfgStorageModuleStorageMode=<storage mode>
Input
cfgStorageModuleStorageMode=<storage mode>
NOTE:
● If the storage mode is 1, then cfgConnectedSlots will be list of all connected slots to that
particular enclosure.
● If the storage mode is 2, then cfgConnectedSlots shows the assignment for each drive.
Example
cfgStorageModuleStorageMode=2
OpenManage Enterprise Modular property database group and object descriptions 31