CLI Guide

[Real-Time Energy Statistics]
System Energy Consumption = 204 kWh
System Energy Consumption Start Time = Not Applicable
System Energy Consumption Timestamp = 05:47:05 08/20/2018
[System Power Status]
Chassis Power State = ON
Overall Power Health = Not OK
Redundancy = No
[System Power Policy Configuration]
System Input Power Cap = Disabled
Redundancy Policy = None
Dynamic PSU Engagement Enabled = Not Applicable
[Power Budgeting]
System Input Max Power Capacity = 11571 W
Input Redundancy Reserve = Not Applicable
Input Power Allocated to Servers = Not Applicable
Input Power Allocated to Chassis Infrastructure = Not Applicable
Total Input Power Available for Allocation = 2384 W (8134 BTU/h)
Standby Input Power Capacity = Not Applicable
getsensorinfo
Description
Displays system sensors.
Synopsis
racadm getsensorinfo
racadm getsensorinfo -c
Input
racadm getsensorinfo
racadm getsensorinfo -c
Where, -c—Compact output format
Example
● racadm getsensorinfo
<senType> <Num> <sensorName> <status> <reading> <units>
<LC> <UC> <PWM>
FanSpeed 1 Fan-1 Not OK N/A rpm
N/A N/A 0
FanSpeed 2 Fan-2 OK 17166 rpm
N/A N/A 100
FanSpeed 3 Fan-3 OK 17250 rpm
N/A N/A 100
FanSpeed 4 Fan-4 OK 17096 rpm
N/A N/A 100
FanSpeed 5 Fan-5 OK 14513 rpm
N/A N/A 100
FanSpeed 6 Fan-6 Not OK N/A rpm
N/A N/A 0
FanSpeed 7 Fan-7 OK 14510 rpm
N/A N/A 100
FanSpeed 8 Fan-8 OK 14479 rpm
N/A N/A 100
22 RACADM sub command details