CLI Guide

Available Power in EPP Pool = Not Applicable
Used Power in EPP Pool = Not Applicable
EPP Percent - Available = Not Applicable
[Chassis Power Supply Status Table]
<Name> <Model> <Power State> <Input Current>
<Input Volts> <Output Rated Power>
PS1 PSU.Slot.1 Online 0.580078 A
228 V 3000 W
PS2 PSU.Slot.2 Online 0.908203 A
227 V 3000 W
PS3 PSU.Slot.3 Online 0.939453 A
228 V 3000 W
PS4 PSU.Slot.4 Online 0.533203 A
228 V 3000 W
PS5 PSU.Slot.5 Online 0.910156 A
227 V 3000 W
PS6 PSU.Slot.6 Online 0.857422 A
227 V 3000 W
[Server Module Power Allocation Table]
<Slot#> <Server Name> <Power State> <Allocation>
<Priority> <Blade Type>
1 SLOT-1 ON 605 W
1 PowerEdge MX840c
2 Extension (1) N/A N/A
N/A N/A
3 SLOT-3 ON 792 W
1 PowerEdge MX840c
4 Extension (3) N/A N/A
N/A N/A
5 SLOT-5 ON 227 W
1 PowerEdge MX740c
6 SLOT-6 ON 228 W
1 PowerEdge MX740c
7 SLOT-7 ON 240 W
1 PowerEdge MX740c
8 SLOT-8 ON 622 W
1 PowerEdge MX740c
NOTE: The <Input Current> values can be a minimum of two and a maximum of six digits after the decimal.
getpminfo
Description
Gets power management status information.
Synopsis
racadm getpminfo
Input
racadm getpminfo
Example
[Real-Time Power Statistics]
System Input Power = 616 W (2101 BTU/h)
Peak System Power = 628 W (2142 BTU/h)
Peak System Power Start Time = Not Applicable
Peak System Power Timestamp = 11:37:36 08/08/2018
Minimum System Power = 606 W (2067 BTU/h)
Minimum System Power Start Time = Not Applicable
Minimum System Power Timestamp = 10:16:08 08/06/2018
System Idle Power = Not Applicable
System Potential Power = Not Applicable
System Input Current Reading = Not Applicable
RACADM sub command details 21