Users Guide

NOTE: The MX7000 chassis facilitates configuration of four SNMP destinations. However, the MXG610s FC IOM
switches support only three SNMP destinations. If the fourth SNMP destination is configured, the IOM ignores it.
6. Enter the Community String.
When you configure the community string for SNMP V1, by default, the community string is appended with |common|
FibreChannel11.
7. Select the Port Number and click Send to test the SNMP trap.
Configuring sys log alerts
You can configure up to four sys log destinations.
To configure system log alerts, perform the following steps:
1. Click Application Settings > Alerts > Syslog Configuration.
2. Select the Enabled check box corresponding to the required server.
3. Enter the destination address or the hostname.
4. Enter the port number.
Logging in to OME-Modular 45