Users Guide

Table 4. Management module Interfaces (continued)
Interface Description
● View the OME–Modular VLAN ID appended to the end of MM IP, if the VLAN is
already configured.
● At-the-box management—Create a group, join group, leave group, or delete group.
● At-the-box storage mapping resolution on compute sled replacement condition.
For more information about the LCD touch panel, see the Dell EMC PowerEdge
MX7000 Enclosure Installation and Service Manual.
SSH Use SSH to connect to the MX7000 chassis and run RACADM commands locally.
RESTful API and Redfish The Redfish Scalable Platforms Management API is a standard that the Distributed
Management Task Force (DMTF) has defined. Redfish is a next-generation systems
management interface standard, which enables scalable, secure, and open server
management. It is a new interface that uses RESTful interface semantics to access data
that is defined in model format to perform out-of-band systems management. It is
suitable for a wide range of servers ranging from stand-alone servers to rack mount and
bladed environments and for large-scale cloud environments.
Redfish provides the following benefits over existing server management methods:
● Increased simplicity and usability
● High data security
● Programmable interface that can be easily scripted
● Follows widely used standards
For more information, see the OME and OME - Modular RESTful API Guide available at
www.dell.com/openmanagemanuals.
SNMP Use SNMP to:
1. Download the OME-Modular MIB file from the https://www.dell.com/support.
2. Use MIB walker tool to get supported information using OIDs.
NOTE: SNMP SET is not supported.
Serial You can use the serial interface to access OME–Modular by connecting the micro USB
port on the rear of the management module to a laptop and opening a terminal
emulator. The user interface that is displayed enables you to log in to the management
module, networking IOMs, or servers (iDRAC). You can have a maximum of one serial
session open at a time.
Quick Sync You can have a maximum of one Quick Sync session open at a time.
KVM You can have a maximum of one KVM session open at a time.
Chassis Direct The Chassis Direct feature enables you to access management consoles such as iDRAC
and management module of devices on the MX7000 chassis.
Viewing chassis hardware
On the OME–Modular home page, click Hardware to view details of the hardware components that are installed in the chassis.
You can also view the chassis hardware details by clicking Devices > Chassis > View Details > Hardware. The hardware
components comprise of chassis power supplies, chassis slots, management module, fans, temperature, FRU, device
management information, installed software, and management ports.
NOTE:
If the Power Supply Unit (PSU) is absent, the health state and power status for the PSU are not displayed on the
Chassis > Hardware > Chassis Power Supplies page.
NOTE: Maintain a minimum interval of two minutes while removing and inserting any device.
34 Logging in to OME-Modular