Users Guide

The mid section of the MCM dashboard displays the health summary of all chassis, compute, networking, and storage devices in
the MCM group. You can view the list of all the devices in the group by clicking All Devices at the upper right corner of the
dashboard.
Below the health summary, you can view the alerts that are based on criticality of the alert and device type. Click All Alerts to
view the list of the alerts that are related to all events in the MCM group.
You can view the details of the recent activities that are related to the group on the right side of the dashboard. The details
comprise of the name and status of the activity, and timestamp of the activity. Click All Activity to view a list of all the
activities that are related to the group, on the Jobs page.
Controlling chassis power
You can turn on and turn off the chassis power supply from the OME–Modular home page.
If you turn off the chassis manually or a power grid failure results in turning off multiple chassis, IOMs, and compute sleds, then,
turning on all the chassis and compute sleds may result in failed inventory jobs for two to three hours. However, the inventory
jobs recover with no impact to the chassis and related components.
To control the chassis power:
1. On the home page, click Power Control and select the required option.
The available options are:
● Power Off (Non-graceful)
● Power Cycle System (Cold Boot)
● Power Off (Graceful)
NOTE:
After login, wait for 7 minutes, if the IP is unavailable, then check if:
○ The cable is connected.
○ DHCP is configured, ensure that the cable is connected to a Top of Rack (TOR) switch that has connectivity to
the DHCP server.
A message is displayed prompting you to confirm your action.
2. Click Confirm to proceed.
Backing up chassis
You must back up the chassis and compute sled configuration for later use. To backup the chassis, you must have administrator
access with the device configuration privilege. The chassis configuration contains the following settings:
● Setup configuration
● Power configuration
● Chassis network configuration
● Local access configuration
● Location configuration
● Slot configuration
● OME–Modular network settings
● Users settings
● Security settings
● Alert settings
You can use the backed-up configuration in other chassis.
To create a chassis backup:
1. On the chassis Overview page, click More Actions > Backup.
The Backup Chassis window is displayed.
2. In Backup File Location, select the Share Type where you want to store the chassis backup file.
The available options are:
● CIFS
● NFS
Logging in to OME-Modular
31