Users Guide

To configure FEC:
1. On the Port Information page, expand the physical port group, and select the Ethernet port .
2. Click Configure FEC.
The Configure Forward Error Correction window is displayed.
3. Select the FEC Type.
The available options are:
● Auto—Applies FEC based on the cable or optic connected
● Off—Disables FEC
● CL74-FC— Configures CL74-RS FEC and supports 25G and 50G
● CL91-RS—Configures CL91-RS FEC and supports 100G
● CL108-RS—Configures CL108-RS FEC and supports 25G and 50G
4. Click Finish to save the changes and return to the Port Information page.
80 Ethernet IO Modules