Release Notes

Tracking number 136224
Deployment and Configuration Job created multiple
times for some sleds during Quick Deploy and Attach
operation for sleds
Description In MCM Setup, the "Deployment and Configuration" job is created multiple times for some sleds during
Quick Deploy and Attach operation. Jobs fail due to the duplicate deployment.
Workaround Ignore the failed deployment jobs. The duplicate jobs do not result in any issue.
Systems affected All systems supported in this release
Tracking number 141623
Error while assigning identities
Description While assigning identities on the Template Deployment > Reserve Identities Error page, you may get
the errors, "Error assigning Identities" and "An application request timed out. Please contact your support
representative if the issue persists." The errors are displayed when many devices are selected or the
system is busy to process all selected devices before the OME-Modular Web interface timeout occurs.
The number of devices which can be processed varies based on several factors including the contents of
the server configuration templates, configured pools, number of identities, and types of identities.
Workaround Select fewer devices for deployment or try again later when the system is not busy.
Systems affected The OME-Modular console during server file deployment.
Tracking number 142004
Unable to log in to OME-Modular Web interface after
performing factory reset
Description
Users may be unable to log in to OME-Modular Web interface after performing the following operations
on a 240 GB MM:
1. Downgrading the MM firmware to 1.00.01 from 1.10.10 or 1.10.20.
2. Performing any factory reset such as racreset, racresetcfg, FIPS_ON, or FIPS_OFF.
The chassis is in bad state despite the reset operation being successful. You may be unable to access the
MM Web interface. The MM IP takes over an hour to come up in such cases. You can run the command,
racadm config -g cfglannetworking -o cfgDNSRegisterRac 0, through serial to get the
IP.
Workaround Downgrading the OME-Modular firmware to 1.00.01 is not recommended. For systems that are in bad
state, remove the MM from the chassis. Reinsert the management modules one after the other and run
the command, racresetcfg in each module.
Systems affected All systems supported in this release, with 240 GB MM when downgraded to 1.00.10.
Tracking number 143891
Known issues 13