Release Notes

Known issues

Topics:

• Template deployment configuration job not created for sled

• Service tag of IOM is reported incorrectly from OME-Modular after reset all

• Multi-chassis firmware rollback fails with error

• Deployment and Configuration Job created multiple times for some sleds during Quick Deploy and Attach operation for sleds

• Error while assigning identities

• Unable to log in to OME-Modular Web interface after performing factory reset

• OME-Modular takes up to 30 minutes to fetch network IOM inventory

• Member chassis storage sleds inventory for all drives displayed as encryption capable in lead chassis

• HTTPS custom port in OME-Modular does not work after upgrading to 1.10.00 or later

• Identity pool options missing in Edit Network view and during deployment

• Member chassis displays error message on promoted lead chassis

Template deployment configuration job not created

for sled

Description

Template deployment configuration job is not created for a sled that is removed and reinserted after the

backup lead is promoted. The job is not created because profiles are attached to the occupied slots from

the original lead.

Workaround Detach and reattach the required profiles for the occupied slots after backup lead is promoted and before

removing or reinserting the sleds.

Systems affected iDRAC, PowerEdge MX740c, and PowerEge MX840c

Tracking number 145969

Service tag of IOM is reported incorrectly from OME-

Modular after reset all

Description

OME-Modular reports a blank service tag for the IOMs after a ‘reset all’, racadm racresetcfg,

operation.

Workaround Perform management module reset or failover.

Systems affected All systems supported in this release.

Tracking number 142890

Multi-chassis firmware rollback fails with error

Description

When you try firmware rollback for compute device components on the member chassis, with

components rollback source as “Device”, from the MCM group lead, a job is created on the member

chassis and the job fails.

Workaround You can roll back firmware with the source as "Device" directly on the respective member chassis.

Systems affected PowerEdge MX7000

12 Known issues