CLI Guide

● Removes the MCM grouping functionality.
NOTE: The reset_config, reset_all, racresetcfg, FIPS_MODE ON/OFF workflow clear the database and the
user information is not retained. Hence, configuration restoration is logged in DELL_INTERNAL_PROCESS.
NOTE: If the member chassis undergoes a factory reset, it becomes a stand-alone chassis and not a member of the multi-
chassis group. You can remove the member from the lead chassis.
NOTE: After performing any reset operation, wait for the IP address before performing the reset operation again.
serveraction
Description Manages the server or storage power. Supported actions are:
● powerdown—perform server power off
● powerup—perform server power on
● powercycle—perform server power cycle
● hardreset—force hard server power reset
● graceshutdown—perform graceful shutdown of server
● reseat—perform a virtual reseat of a server/storage
NOTE: This action requires -f option to force the action.
● powerstatus—display current power status of server
NOTE: This action is not allowed with -a option
Synopsis
racadm serveraction -m <module> <action>
racadm serveraction -a <action>
Input
● -m—The <module> must be server-<n>, where n = 1 to 8
● -a—Performs power action on all servers
Example
● Power action on a single server:
racadm serveraction -m server-1 powerdown
● Power action on all servers:
racadm serveraction -a powerup
● Reseat action on a single storage:
racadm serveraction -m storage-2 -f reseat
setniccfg
Description
Modifies network configuration properties.
Synopsis
racadm setniccfg [-m <module>] -d
racadm setniccfg [-m <module>] -s <ipAddress> <netmask> <gateway>
racadm setniccfg [-m <module>] -v [vlan_id]
RACADM sub command details 23