CLI Guide

Synopsis
racadm ifconfig
ping
Description Sends ICMP echo packets on the network.
Synopsis
racadm ping <ipaddress>
Input <ipaddress>—The IP address of the remote endpoint to ping.
Example To ping ip address 192.168.0.1
racadm ping 192.168.0.1
ping6
Description Sends ICMP echo packets on the network.
Synopsis
racadm ping6 <ipaddress>
Input <ipaddress>—The IPv6 address of the remote endpoint to ping.
Example To ping ipaddress FE80:0000:0000:0000:0202:B3FF:FE1E:8329
racadm ping6 FE80:0000:0000:0000:0202:B3FF:FE1E:8329
racreset
Description
Resets the RAC.
Synopsis
racadm racreset
racresetcfg
Description
Restores the RAC configuration to factory defaults.
Before or after performing racresetcfg in the member chassis, go to the lead chassis and remove the
member chassis from the MCM group.
Synopsis
racadm racresetcfg
Input
● -f—Resets all management module configurations to the default configuration and preserves the
user-configured and network settings.
Running the racresetcfg command results in the following:
● Clears Management Module Configuration and resets to Initial settings.
● Rediscovers iDRAC.
NOTE: iDRAC discovery may take longer, as the Chassis may not receive the MDNS message from iDRAC immediately.
22 RACADM sub command details